衡水电动伸缩门优质厂

什么是喷漆

What is painting?

喷漆是人造漆的一种，用硝酸铅维素、树脂、颜料、溶剂等制成。通常用喷枪均匀地喷在物体表面，耐水、耐机油，干得快，用于漆汽车、飞机、木器、皮革等。该物质有毒性，对身体有一定影响，不同品牌的喷漆由于成分含量不同毒性也不同。使用时应特别注意安全，避免吸入和皮肤接触。

Spray paint is a kind of artificial paint, made of lead nitrate, resin, pigment, solvent, etc. Usually sprayed evenly on the surface of the object with spray gun, water-resistant, oil-resistant, dry quickly, used to paint cars, aircraft, wood, leather, etc. The substance is toxic and has a certain impact on the body. Different brands of spray paint have different toxicity due to the different content of ingredients. Special attention should be paid to safety when using, so as to avoid inhalation and skin contact.

烤漆木门和喷漆木门的区别

Difference between painted wood doors and painted wooden doors

1、工艺

1, process

烤漆：在基材上打三遍底漆、四遍面漆，每上一遍漆，都送入无尘衡温烤房，烘烤。

Baking Paint: primer three times on the substrate, top coat four times, each time the paint, are sent to the dust-free baking room, baking.

喷漆：在基材上磨呢子，再在上面喷上漆，自然晾干。

Spray paint: wear woolen cloth on the substrate, spray paint on it, and dry naturally.

2、漆膜

2. Lacquer film

烤漆：烤漆门板四边棱角分明，手感光滑细腻，而且棱角的颜色和饰面颜色相同，饱满且光鲜。

Paint: Paint door board with clear edges and corners, smooth and delicate feel, and edges and corners of the same color and decoration, full and bright.

喷漆：棱角部分毛糙，颜色比门板浅。证明漆膜不均匀，色彩不饱满。

Spray paint: rough edges and corners, lighter than door panels. It proves that the paint film is uneven and the color is not full.

3、纹理

3, texture

烤漆：对着光线查看烤漆门板表面，依然能够感觉光滑细腻，没有无纹路或者桔皮现象。

Paint: Look at the surface of the paint door panel against the light, still can feel smooth and delicate, no lines or orange peel phenomenon.

喷漆：喷漆门板表面有纹路，不光滑，有桔皮现象。

Spray paint: paint door plank surface has grain, not smooth, have orange peel phenomenon.

4、表面

4. Surface

烤漆：用手摸烤漆门板表面，手感平整且光滑。

Baking varnish: touch the surface of the door plate with your hand and feel smooth and smooth.

喷漆：喷漆门板用手触摸就会感觉不光滑，有尘粒或者气泡。

Spray paint: paint door panels will feel unsmooth with hand touch, with dust particles or bubbles.

5、结实

5, sturdy

烤漆：烤漆门板通常更加结实，就算聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛 用硬物击打也不会掉皮。

Baking paint: paint door panels are usually more solid, even if they are hit with hard objects, they will not peel.

喷漆：用硬物击打喷漆门板则会出现掉皮或者漆膜脱落的现象。